Five advantages of one-stop shopping for LED grow lights + grow racks

Jul 22, 2025

Leave a message

When a planting project is about to start, quickly and efficiently purchasing planting equipment becomes a top priority. In indoor planting, lighting systems and planting rack systems are the mainstream configurations. However, growers often need to contact the manufacturer of the LED Grow light, and then contact the manufacturer of the planting racks. During this period, they also need to coordinate their matching. Not only is the communication cost high, but it is also easy to have mismatch problems.

 

Today, we share a real customer's purchasing story to give you an in-depth understanding of why "one-stop purchasing" is a wiser choice.

A few months ago, we received an email from a customer named Sertel from California, USA. He is planning an indoor planting project with a size of 25*12m, intending to carry out 5-layer planting, and the planting layer height requirement is 30cm

 

He wrote in the message:
JT Grow Light

 

Sertel has contacted several lighting suppliers and several grow rack manufacturers, but has never been able to determine the most suitable combination. The size and wiring method of the lamps were not coordinated with the height of the frame and the load-bearing design of the structure. The drawings were revised repeatedly, but they still could not be implemented. He was very anxious. The project was tight and progressed slowly.

 

How did the JT Grow light help him?

 

After receiving Sertel's needs, after many communications, we learned in detail the size of his room, the crops (vegetables), the growth height of the plants, the cultivation methods, etc. We developed a complete one-stop planting solution for him:

 

1) According to the spatial layout, we designed 6-layer Vertical Grow Racks, made of Q235 cold-rolled steel, with a single-layer load-bearing capacity of ≥300kg and a layer height of 40cm, which is convenient for planting and maintenance;

2) Each layer is equipped with a PPFD evenly distributed LED full-spectrum plant light (660nm red light + 450nm blue light), and provides complete lamp distance/power recommendations;

3) The rack size is: 5.05 meters long, 1.22 meters wide, and 2.4 meters high. According to the actual area of the field, it is more reasonable to place 24 sets of planting racks at the end.

4) Simultaneously plan ventilation, drainage routing, and control system reserved interfaces;

5) Provide a 3D modeling layout diagram + PPFD lighting simulation report, so that Sertel can see it at a glance;

6) Packing and delivery, one-stop service.

3D map

Growing Rack Layout Plan

 

vertical grow racks map

Growing Rack Front View

 

After receiving the solution, Sertel said excitedly: "You are a company that understands how to use Grow Rack and LED Grow Light together!"

 

From Sertel's project, we summarized the five core advantages of "one-stop procurement":

 

1️⃣ The lighting system and the vertical planting rack are perfectly matched
We have customer feedback that because the lighting system and the planting rack come from different suppliers, the details are not communicated in place, resulting in insufficient layer height, incorrect lamp size, too high or too low wattage, which affects the planting effect.

In the one-stop procurement plan, we recommend reasonable lamp size, lamp distance, and layer height ratio according to plant needs to ensure that each beam of light can accurately illuminate the top of the plant, improve light energy utilization, and yield.

 

2️⃣ Save procurement and communication costs, and increase efficiency by more than 2 times
Sertel used to connect with 5 suppliers back and forth, and each modification had to be explained repeatedly, and a lot of time was wasted on coordination. And we finalized all the designs and quotations in just one week.

 

One-stop procurement means:
📦 Directly connect with one manufacturer, a complete set of planting plans, one quotation, one plan communication, one transportation, and one after-sales service.

 

Allow users to finalize the purchase of equipment in the shortest time, avoid ineffective communication, and let growers focus more on cultivation management.

 

3️⃣ Scientific lighting layout + engineering-grade bracket structure to improve planting performance
LED lights are not brighter, and Grow Racks are not more and denser.
Through PPFD lighting simulation and heat distribution testing, we customize scientific and reasonable lighting distribution maps for customers to avoid hot spots and lighting dead spots.


At the same time, the Grow Rack structure is sturdy, corrosion-resistant, and moisture-resistant, and can support the weight of the entire lighting + planting system to ensure safe operation.

 

4️⃣ Simple later operation and maintenance, more convenient upgrades
Many customers have reported that the early equipment was not well equipped, and the later wiring, power management, and maintenance were very headaches. Our one-stop solution uses a unified lamp model, power interface, and pendant system. All parts are compatible, and later replacement/expansion is very convenient.

 

For Sertel, if a layer of planting is added in the future, only one set of modules needs to be added to seamlessly connect to the original system.

 

5️⃣ Professional team support, worry-free from design to implementation
JT not only provides products, but also solutions. Our team includes structural engineers, spectrum designers and project consultants, and can provide each customer with:

1) Exclusive planting rack + lighting layout design

2) PPFD lighting simulation and heat distribution map

3) Installation guidance video and technical documents

4) International logistics assistance and customs clearance advice

 

After the project was delivered, Sertel also recommended his friends in Michigan because he trusted our one-stop service.

Vegetable plants.jpg

 

JT, one-stop planting system solution expert

 

As a manufacturer focusing on LED plant lights and planting rack systems, we understand every detail challenges encountered by customers in indoor planting. We not only sell lights and iron racks, but more importantly, we sell "landing solutions".

 

If you are also facing the following problems:

1) Don't know how to choose a suitable LED plant light?

2) Worried about the instability of the rack and insufficient height?

3) Are multiple equipment brands difficult to be compatible?

4) Looking for a team that can control the entire process from design to delivery?

 

Welcome to contact JT, we will tailor the most suitable solution for you to make planting easier and more efficient.

All LED Grow Light category.jpg

 

Grow racks system.jpg

 

Send Inquiry